【油墨特性】

双液型，为通用性的金属印刷油墨,属热烘性的金属油墨，可丝印也可移印

【适用材料】

不锈钢、铝合金等各种金属材料

【产品举例】

保温杯喷漆面、不锈钢表面、电热水壶、电饭煲等

【基本性能】

耐酒精：

用加载500克力的粘酒精（99.7％）棉布来回平推120次不露底

附着力测试：

百格法划1mm×1mm #格  用3m胶纸以90度直角剥离5次无脱落

耐摩擦：

用加载500克力的普通橡皮来回平推500次不露底

【干燥条件】

烘烤150±±5℃ 30分钟

【注意事项】

1、喷漆面因使油漆、喷涂工艺不同，造成材料多样性，请先进行性能测试再生产印刷。

2、金属墨属于慢反应固着型油墨，测试性能须在印刷后24小时以上再进行测试。

[ink characteristics]

double liquid, a versatile metal printing ink, which is a hot - baked metal ink【敏感词】can be imprinted by screen printing.

[applicable materials]

all kinds of metal materials, such as stainless steel, aluminum alloy, etc.

[product examples]

heat preservation cup paint surface, stainless steel surface, electric kettle, electric cooker, etc.

[basic performance]

alcohol resistance:

with 500 grams of alcohol loaded adhesive (99.7％) to return to the 120 cotton plug does not open at the end

adhesion test:

100 1mm * 1mm # delimit lattice method lattice with 3m tape to a 90 degree angle off 5 times without loss

friction resistance:

by loading 500 grams of ordinary rubber back flat push 500 times show

[drying condition]

bake 150 + 5 centigrade for 30 minutes

[cautions]

1. because of the different paint【敏感词】spraying process, the material diversity is caused by the spray paint surface,【敏感词】the performance test【敏感词】reproduction printing are made first.

2, the metal ink is a slow reaction fixing ink,【敏感词】the test performance must be tested more than 24 hours after the printing.